DIY Installation Of Blackout Blinds: A Step-By-Step Guide

No Comments

Blackout blinds are window treatments that block out light from the outside, creating total darkness in space when fully closed. They effectively block out most of the light that would otherwise enter the room since they are often made of opaque materials that prevent sunlight from passing through the fabric.

Blackout blinds are frequently used in bedrooms, nurseries, and media rooms since it is crucial to maintain privacy, comfort, and a good night’s sleep in these spaces. Blackout blinds can be installed on various window types, including regular windows, skylights, and French doors. They are available in a variety of sizes, colors, and materials.

Step-By-Step Guidance To Install Blackout Blinds

You can enjoy the advantages of light control, privacy, and better sleep quality in your house by installing blackout blinds, which can also be a terrific DIY project. Installing blackout blinds can be relatively simple if you have the right equipment and supplies. Here is a step-by-step manual to assist you in installing blackout blinds on your own.

1. Gather Tools And Materials

Gather Tools And Materials

Make sure you have all the required equipment and material before you begin the installation process. Depending on the type of blinds you may select and the type of window you are installing them on, tools and materials that may be required are:


  • Measuring tape
  • Screwdriver
  • Level
  • Pencil or marker
  • Drill and saw (if required)


  • Blackout Blinds
  • Mounting Brackets
  • Screws
  • Wall anchors and valance or fascia (if required)
  • Optional: Spacer Blocks or shims (if needed for leveling)

2. Measure And Mark

Measure And Mark

To make sure your blackout blinds fit properly, precise measurements are necessary. Consider any impediments, such as window handles or locks, while measuring the width and height of your window. Once you have measured and placed your blackout blinds, mark the location of the mounting brackets using a level and a maker. To hang correctly, make sure that the marks are leveled and evenly spaced.

3. Install Mounting Brackets

Install Mounting Brackets

The mounting brackets then must be installed. Depending on the style of mount you’ve chosen, you may need to screw the brackets into the window frame, the wall, or the ceiling when installing them. Use wall anchors to make sure that brackets are firmly fastened if you are mounting the blinds on a surface that could not offer enough support. Drill holes for the screws and anchors before fastening the brackets including screws or additional ones.

4. Install Blackout Blinds

Install Blackout Blinds

It’s time to install the blackout blinds when the brackets are put in place. This may include sliding the blinds into the brackets, snapping them into the position, or fastening them with clips or other hardware, depending on the type of blackout blinds you have selected. Make sure the blinds are installed correctly by carefully following the manufacturer’s instructions.

5. Install Valance or Fascia (If Applicable)

Install Valance or Fascia

You might also need to install the valance or fascia that comes with your blackout blinds separately once the blinds are hung. Usually, the valance or fascia is used to cover the top of the blinds and complete their appearance. They should be installed following the manufacturer’s instructions, which may call for fastening them with clips, magnets, or other hardware.

6. Test And Adjust

It is crucial to test your blinds after installation and make any required modifications. Pull the blinds up and down to ensure that they operate smoothly. Ensure that they are leveled and correctly positioned relative to the window frame. You might need to tweak the brackets, use spacer blocks or shims to level the blinds, or all three if they aren’t leveled.

Test And Adjust

7. Clean And Enjoy

When your blackout blinds are set up and adjusted correctly, it’s time to tidy up and benefit from increased privacy and light control in your house. When installing the blinds, clear the installation area of any packing or debris and clean the window frame and blinds of any dirt or dust.


A quick and satisfying do-it-yourself job that can enhance the comfort and usefulness of your home is the installation of blackout blinds. Anyone can install blackout blinds in a few easy steps with the proper materials and tools. Don’t forget to take accurate measurements. Place the mounting brackets firmly and then test. You will benefit from more privacy and light control in your house with attractive and practical blackout blinds with a little work and attention to detail.

Tags: Blog

Related Articles

Creating A Cozy And Inviting Home With Eyelet Curtains

Creating A Cozy And Inviting Home With Eyelet Curtains

Sheer Curtains Balancing Privacy And Natural Light

How Sheer Curtains Can Help You Achieve Privacy And Natural Light Balance

Tips & Tricks For Styling Sheer Window Coverings

Top 4 Tips To Sheer Curtains for Styling Your Windows

Which Curtain Fabric Is In Use In 2021

Which Curtain Fabric Is In Use In 2024? 4 Best Tips To Choose Fabrics

Living Room Curtains

Where To Buy Curtains For The Living Room in UAE |

A Guide To Choosing The Right Window Covering

A Guide To Choosing The Right Window Covering: Sheer Curtains vs. Other Curtains

You might also like